The car’s climate control system is one of the important components that provide comfort for the driver and passengers during a trip. One luxury car that is famous for its climate control system is the BMW 2007-M6. The climate control system in the BMW 2007-M6 has the ability to automatically adjust the temperature and air circulation inside the car, so that the driver and passengers can enjoy comfort inside the car without having to manually adjust the climate control system. This article will further discuss the climate control system in the BMW 2007-M6, how the system works, and why this system has become one of the highly valued features among luxury car enthusiasts.
Automatic climate control

1 Air directed toward the windshield and side windows
2 Air for the upper body area
3 Air to footwell
4 Temperature, left side of passenger compartment
5 Maximum cooling
6 Defrosting windows and removing condensation
7 Air volume, manual
8 Switching off automatic climate control
9 Switching cooling function on and off manually
10 Temperature, right side of passenger compartment
11 Residual heat mode
12 AUTO program
13 AUC automatic recirculated-air control/recirculated air mode
14 LED for parked car ventilation
15 Rear window defroster
16 Air grill for interior temperature sensor – please keep clear and unobstructed
The current setting for air distribution is displayed on the Control Display.
A congenial climate
The AUTO program offers the optimum air distribution and air volume for virtually all conditions, refer to AUTO program below. Now you only need to select an interior temperature that you find pleasant. The following sections contain more detailed information on the available setting options. Most settings are stored for the remote control currently in use
AUTO program

The AUTO program handles the adjustment of air volume and air distribution to the windshield and side windows, in the direction of the upper body and in the footwell. It also adapts your instructions for the temperature to outside influences throughout the year.
The cooling is switched on automatically with the AUTO program. At the same time, a condensation sensor controls the program in such a way that window condensation is prevented as much as possible.
Intensity of AUTO program
To meet your individual needs, you can increase or decrease the intensity of the automatic climate control.
- Press the MENU button. This opens the start menu.
- Move the controller to the left to open “Climate”.
- Select “Automatic programs” and press the controller.

- Select the desired intensity and press the controller.
✓ The marked intensity of the automatic program is switched on.
Convertible program*
When the convertible top is opened, the convertible program can also be selected. In the convertible program, the automatic climate control is optimized for driving with the convertible top open. In addition, the air volume is increased as the speed increases. If the convertible program has been selected, it is automatically active every time the top is opened.
▶ The effect of the convertible program can be greatly enhanced if the wind deflector is installed.
Temperature

Set the desired temperature individually on the driver’s and front passenger side. The automatic climate control achieves this temperature as quickly as possible at any time of year, if necessary with the maximum cooling or heating capacity, and then keeps it constant.
▶ When switching between different temperature settings in rapid succession, the automatic climate control does not have sufficient time to achieve the set temperature.
In the highest setting you activate the maximum heating output, regardless of the outside temperature.
Adapting temperature in upper body region
- Open the start menu.
- Open “Climate”.
- Select “Vent settings” and press the controller.
- Select the field by moving the controller and adjust the temperature by turning the controller.

Defrosting windows and removing condensation

Quickly remove ice and condensation from the windshield and front side windows. To do this, also switch on the cooling function.
Rear window defroster

The rear window defroster switches off automatically after a certain amount of time. Convertible: the rear window defroster is only activated when the rear window is closed. Depending on the vehicle equipment, upper wires are used as an antenna and are not part of the rear window defroster.
Air volume, manual

You can adjust the air volume by turning. You can reactivate the automatic mode for the air volume with the AUTO button.
Manual air distribution
- Open the start menu.
- Open “Climate”.
- Select “Vent settings” and press the controller. The driver’s and front passenger side can be adjusted separately with the fields on the right or left side.
- Select the driver’s or front passenger side if necessary. Move the controller to the right or left repeatedly until the driver’s side or front passenger side is selected.
- Select the desired field by moving the controller.
- Turn the controller to adjust the air distribution.

Driver’s side:
1 Air directed toward the windshield and side windows
2 Air for the upper body
3 Air to footwell Front passenger side:
4 Air for the upper body
5 Air to footwell
▶ Pressing the AUTO button cancels the air distribution settings via iDrive and vice versa.
Switching cooling function on and off

The cooling function cools and dehumidifies the incoming air before reheating it as needed according to the temperature setting. Depend- ing on the weather, the windshield may fog over briefly when the engine is started. The cooling function is switched on automati- cally with the AUTO program. The passenger compartment can only be cooled with the engine running.
Maximum cooling

Maximally cooled air is obtained as quickly as possible from an outside temperature above approx. 327/0 6 and with the engine running.
The automatic climate control changes over to the lowest temperature and switches into the recirculated-air mode. The maximum air volume only flows out of the vents for the upper body. It is therefore necessary for these vents to be open for maximum cooling.
AUC Automatic recirculated-air control/recirculated-air mode

You can respond to unpleasant odors or pollutants in the immedi- ate environment by temporarily suspending the supply of outside air. The system then recirculates the air currently within the vehicle. In AUC mode, a sensor detects pollutants in the outside air and controls the shut-off automatically.
Press the button repeatedly to run through the following control sequence:
- LED off: outside air flows into the vehicle continuously.
- Right LED on, AUC mode: the system detects pollutants in the outside air and responds by blocking the supply of outside air when required.
- Left LED on, recirculated-air mode: the supply of outside air into the vehicle is shut off continuously.
⚠ If condensation starts to form on the inside window surfaces during operation in the recirculated-air mode, you should switch it off while also increasing the air volume as required. The recirculated-air mode should not be used over a longer period of time, as the air quality inside the vehicle deteriorates continuously.
Residual heat

The heat stored in the engine is used to heat the passenger compartment, e.g. while stopped at a
school to pick up a child. The function can be switched on when the following conditions are met:
- up to 15 minutes after switching off the engine
- engine at operating temperature
- sufficient battery voltage
- outside temperature below 777/25 6
The LED lights up when the function is switched on. With the ignition lock at radio readiness or higher the interior temperature, the air volume and the air distribution can be set.
Switching automatic climate control on and off

The air volume, the heater and the cooling function are all switched off. You can restart the automatic cli- mate control by pressing any of its buttons except the REST button.
Ventilation

1 Knurled wheels for smoothly opening and closing vent outlets
2 Levers for changing the airflow direction
⚠ Do not drop any foreign objects into the vent outlets; otherwise, they could be catapulted outwards and cause injuries.
Ventilation for cooling
Adjust the vent outlets to direct the flow of cool air in your direction, for instance, if the interior has become too warm, etc.
Draft-free ventilation
Set the vent outlets so that the air flows past you and is not directed straight at you.
Microfilter/activated-charcoal filter
The microfilter removes dust and pollen from the incoming air. The activated-charcoal filter provides additional protection by filtering gaseous pollutants from the outside air. Your BMW center replaces this combined filter as a standard part of your scheduled maintenance. You can have more detailed information shown on the Control Display.
Parked car ventilation
The concept
The parked car ventilation blows air into the passenger compartment to lower interior temperatures. It is ready to use in the parked-car mode at any outside temperature. You can set two different times for the system to start. The parked car ventilation can also be switched on and off directly. It remains switched on for 30 minutes.
Since the system uses a substantial amount of electrical current, you should refrain from activating it twice in succession without allowing the battery to be recharged in normal operation between uses.
The air emerges through the upper body region vent outlets in the instrument panel. Therefore, please open the vent outlets. The parked car ventilation system is operated via iDrive.
Switching on and off directly
- Open the start menu.
- Move the controller to the left to open “Climate”.
- Select “Parked car operation” and press the controller.
- Select “Automatic ventilation” and press the controller.
- Select “Parked car ventilation” and press the controller.

√ The parked car ventilation is switched on. The symbol on the display of the automatic climate control flashes.
Preselecting activation times
- Open the start menu.
- Move the controller to the left to open “Climate”.
- Select “Parked car operation” and press thecontroller.
- Select “Activation time” and press the controller.
- Move the controller to the left or right to select “Timer 1” or “Timer 2”.

6. Select the time and press the controller. The first time setting is selected

- Turn the controller to make the adjustment.
- Press the controller to apply the setting. The next adjustment is selected.
- Make the remaining adjustments. After the last adjustment, the time is stored.
Activating timer
Move the controller to the left or right to select “Timer 1” or “Timer 2” and then press the controller.

√ The switch-on time is activated. The symbol on the display of the automatic climate control lights up. The symbol on the display of the automatic climate control flashes when the parked car ventilation has switched on.
▶ The parked car ventilation is only available for activation within the subsequent 24 hours. After that, the time must be reactivated.