BMW 2007-M6 is a luxury car that offers an unparalleled driving experience. With its sleek design, powerful engine, and advanced technology, this car is perfect for those who crave adventure on the road. One of the best features of the BMW 2007-M6 is its destination guidance system. This system allows drivers to easily navigate their way to their destination with ease and convenience.
The destination guidance system in the BMW 2007-M6 is highly intuitive and easy to use. The system is displayed on the car’s LCD screen, which is located in the center of the dashboard. The screen provides a clear and concise map, as well as turn-by-turn directions to help drivers reach their destination without any hassle.
The system is powered by GPS technology, which means that it can accurately track the car’s location and provide real-time traffic updates. This allows drivers to avoid traffic jams and find the fastest route to their destination. The system also offers voice guidance, which means that drivers can focus on the road ahead while listening to the directions.
Another great feature of the destination guidance system in the BMW 2007-M6 is the ability to search for points of interest. This feature allows drivers to easily find nearby restaurants, gas stations, and other attractions. The system even provides reviews and ratings for these locations, making it easier for drivers to make informed decisions.
In conclusion, the destination guidance system in the BMW 2007-M6 is a valuable tool for any driver. Whether you are traveling to a new city or just need directions to a local destination, this system will help you get there with ease and convenience. With its advanced technology and intuitive design, the BMW 2007-M6 is the perfect car for those who crave adventure on the road.
Starting destination guidance
- Change to upper field if necessary. Turn the controller until “Navigation” is selected and press the controller.
- Select a destination from the destination list and press the controller or enter a new destination.

3. Select “Start guidance” and press the controller.

After the route has been calculated, destination guidance is indicated by arrows or a map display on the Control Display.
▶ If the route criteria “Avoid highways”, “Avoid tollroads” or “Avoid ferries” are selected, the calculation time for the route can increase considerably.
The destination guidance can also be started in the arrow or map view: Select the symbol and press the controller. During destination guidance, you can operate other equipment via iDrive at any time. You are
notified well in advance of a necessary change of direction by spoken instructions and the display of the direction arrows.
Terminating/continuing destination guidance
In arrow display or map view
Select the symbol and press the controller.

In destination list
This symbol marks the current destination.
- Select the current destination and press the controller.

- Select “Stop guidance” and press the controller.

If the destination was not reached before the end of the last trip, upon restarting you will see the question: “Continue guidance to destination?”. The destination guidance starts automatically after a short time. To start destination guidance immediately: Select “Yes” and press the controller.
Displaying route
You have the option of displaying various views of the route during destination guidance.
▶ From another menu, you can change directly to the screen last displayed.
Displaying arrow display
- Select “Navigation” and press the controller.
- Change into the fourth field from the top. Turn the controller until “Arrow display” is selected and press the controller.

1 Street name for change of direction
2 Distance to change of direction
3 Change of direction
To exit from the menu: Select the arrow and press the controller.
Displaying map view
You can have your current position displayed on a map. After starting the destination guidance, the planned route is shown on the map.
- Select “Navigation” and press the controller.
- Change into the fourth field from the top. Turn the controller until the desired map view is selected:
- “Map facing north”
- “Map direction of travel”
- “Perspective

- Press the controller.

1 Switching voice instructions on/off
2 Starting/stopping destination guidance
3 Selecting destination using map
4 Displaying the menu in which the information last selected can be displayed/hidden.
5 Changing map view
- “Map facing north”
- “Map direction of travel”
- “Perspective”
6 Changing route criteria
7 Manually displaying traffic information*
8 Arrow to destination as the crow flies
The estimated time of arrival and the distance to the destination are shown in the bottom line of the Control Display. To exit from the menu:
Select the arrow and press the controller. At scales of less than 250 miles/500 km, you have the option of deciding whether to orient the map to north or toward your current direction of travel. At scales of 250 miles/500 km or greater, the map always points toward north.
Changing map view
Select the corresponding symbol and press the controller. The next map view is displayed.
Changing scale
Turn the controller to change the scale.
Displaying towns/cities and streets of the route
You can have the roads and towns along th route displayed during destination guidance. The distances remaining to be traveled on each individual road are also displayed.
- Select “Navigation” and press the controller.
- Change into the third field from the top. Turn the controller until “Route list” is selected and press the controller.

To exit the menu: Select the arrow and press the controller.
Destination guidance with voice instructions
Switching voice instructions on/off

Voice instructions can be switched on or off during the destination guidance in the arrow or map view: Select the symbol and press the controller.
To switch the voice instructions on/off at any time:
- Press the MENU button. This opens the start menu.
- Press the controller to open the I menu.
- Turn the controller until “Settings” is selected and press the controller.

- Turn the controller until “Language / Units” is selected and press the controller.
- Change to upper field if necessary. Turn the controller until “Languages” is selected and press the controller.

6. Select “Navigation voice instructions” and press the controller.

✓ The voice instructions are switched on. The setting is stored for the remote control currently in use*.
Repeating and canceling voice instructions
With the programmable button on the steering wheel you can also make the following settings.
- Repeat the voice instruction: Press the button.
- witch voice instructions on/off: Press button longer.
Setting volume of voice instructions
The volume can only be adjusted during a voice instruction.
- Repeat the last voice instruction, if required.
- Turn the knob during the voice instruction to select the desired volume.

This volume is independent of the volume of the audio sources. The setting is stored for the remote control currently in use.
Bypassing route sections
During destination guidance, you can revise the navigation system’s route recommendations to avoid particular stretches of road. Enter the number of miles/kilometers that you want to travel before returning to the original route.
- Select “Navigation” and press the controller.
- Change into the third field from the top. Turn the controller until “New route” is selected and press the controller.

- Turn the controller to enter the desired number and press the controller.
The route is recalculated. To exit from the menu without changing the route: Select the arrow and press the controller.
Traffic information*
In population centers you can display traffic information from radio stations that transmit information of the Traffic Info traffic warning service. This information of the traffic warning services is constantly updated using measuring data from traffic routing centers and information from traffic congestion indicators.
During destination guidance the traffic information located near you on the route is automatically displayed. Regardless of whether the destination guidance is active, you can display the traffic information in the map view or in a list.
Switching reception of traffic information on/off
- Press the MENU button. This opens the start menu.
- Press the controller to open the I menu.
- Turn the controller until “Settings” is selected and press the controller.

- Turn the controller until “Traffic Info settings” is selected and press the controller.

- Select “Traffic Info” and press the controller.

✓ The traffic information can be received and displayed.
“AUTO”: automatic selection of the Traffic Info station with the strongest reception.
▶ Depending on the station, either the station name, frequency, local number or other information is displayed.
Manually displaying traffic information
During destination guidance
Traffic information can be displayed manually during destination guidance in the arrow or map view.
⚠ If the symbol is shown with a red border, traffic information is available for the planned route. Select the ⚠ symbol and press the controller.

During destination guidance, the traffic information on the planned route is marked with a yellow lozenge.

First the traffic information along the planned route is shown sorted according to the distance to the current vehicle position.
With destination guidance switched off
- Open the start menu.
- Move the controller to the right to call up “Navigation”.
- Select “Traffic Info” and press the controller.

First the traffic information along the planned route is shown sorted according to the distance to the current vehicle position.
Displaying detailed traffic information
Select a traffic information item from the list and press the controller.

To exit from the menu: Select the arrow and press the controller.
Depiction of traffic information in map view
The traffic information symbols are shown in the map view up to a scale of 100 miles/200 km. Traffic event with map scales greater than 5 miles/10 km, arrow points in the direction of travel concerned Several traffic events have been received. Select a smaller scale to display these individually.

With a scale of up to 5 miles/10 km, additional information is displayed. The length, direction and effect of a traffic obstruction are indicated with arrows along the route, e.g.

Along planned route
Colored symbol with the traffic obstruction symbol.
Outside planned route
- Map scale up to 5 miles/10 km: White symbol with black or gray border with the traffic obstruction symbol
- Map scale from 10 miles/20 km: White symbol with black border and an arrow in the direction concerned
Traffic information during destination guidance
The system behavior varies depending on whether “Dynamic route” is selected.
Displaying traffic obstructions
If a traffic obstruction is reported to the navigation system and “Dynamic route” is not selected, you will be provided with certain information from a distance of approx. 25 miles/40 km, e.g. the length of the traffic congestion. The last possible junction will be displayed shortly before this.

Select “Detour” and press the controller. The navigation system determines a new route to bypass the traffic congestion. This information is also displayed if you have called up a different application on the Control Display.
Hiding traffic obstructions
If “Dynamic route” is selected, the route in case of traffic obstructions is automatically changed. The system does not point out traffic obstructions along the original route. Depending on the type of road as well as the type and length of traffic obstruction, the route can also be calculated in a way that passes
through the traffic obstruction.

Displaying current position
You can also display your current position with the destination guidance switched off.
- Select “Navigation” and press the controller.
- Change into the fourth field from the top. Turn the controller until “Current position” is selected and press the controller.

The current position of your BMW is displayed.

If the navigation system is unable to identify a town or city, your current map coordinates will appear. To exit from the menu: Select the arrow and press the controller. You can also have the current position displayed on a map.