BMW M6 2007 is a luxurious sports car that offers an outstanding driving experience with excellent control. The car is equipped with a 500 horsepower V10 engine that can produce high speeds and incredible acceleration. Remarkable control features include a carbon-ceramic braking system that provides strong and reliable grip, as well as adaptive suspension that allows drivers to adjust the suspension characteristics to be more comfortable or sporty according to their preferences.
Drivers can also manually adjust the transmission settings using paddle shifters or choose automatic settings for a more relaxed driving experience. The car’s interior is equipped with a sophisticated entertainment system, very comfortable sport seats, and has a very elegant appearance. Overall, the BMW M6 2007 is a car that is able to provide a very enjoyable driving experience with excellent control.
Odometer, outside temperature display, clock

1 Time, outside temperature
2 Odometer and trip odometer
3 Press button:
- with ignition switched on, trip odometer is reset
- with ignition switched off, odometer is briefly displayed
Tachometer

The advance warning field, arrow 1, and the red warning field, arrow 2, change depending on the engine temperature. As the engine temperature rises, the permissible engine speed also increases. Avoid allowing the engine speed to rise as far as the advance warning field whenever possible. Always avoid engine speeds in the red warning field. In this range, the fuel supply is interrupted to protect the engine.
Coolant temperature
Should the coolant and therefore the engine become too hot, a warning lamp lights up. In addition, a message appears on the Control Display.
Engine oil temperature gauge

The general operating temperature lies between 1757/806 and 2507/1206. Do not exceed a value of approx. 2657/1306. If the engine oil temperature is too high, the permissible engine speed, and with it the available
engine output is reduced.
Fuel gauge

Fuel tank capacity: approx. 18.5 US gal/70 liters. If the tilt of the vehicle varies for a longer period, when you are driving in mountainous areas, for example, the indicator may fluctuate slightly.
Reserve
After the reserve quantity has been reached, a message briefly appears on the Control Display; the cruising range is shown in the computer. Below a range of approx. 30 miles/50 km, the message remains on the Control Display.
⚠ Refuel as soon as possible once your cruising range falls below 30 miles/50 km, otherwise engine functions are not ensured and damage can occur.
Computer
Displays in instrument cluster

To display the information, press the BC button in the turn signal lever. The following information is displayed in the specified order:
- Time and outside temperature
- Cruising range
- Average fuel consumption
- Oil level
▶ Manual transmission: The range, average consumption and fluid level are shown in the lower display in place
of the gear indicator. It is possible to change between the time and date display by pressing the CHECK button.
Time
To set the time.
Outside temperature warning
If the display drops to +377/+36, a signal sounds and a warning lamp lights up. A message appears on the Control Display. There is an increased danger of ice.
⚠ Ice can form even at temperatures above +377/+36. Drive carefully, especially on bridges and shaded roadways; otherwise, your risk of accident increases. You can set the unit of measure 7 or 6 on the Control Display.
Cruising range
Displays the estimated cruising range available with the remaining fuel. The range is projected based on the driving style over the last 20 miles/ 30 km.
⚠ Refuel as soon as possible once your cruising range falls below 30 miles/ 50 km, otherwise engine functions are not ensured and damage can occur.
Average fuel consumption
The average fuel consumption is calculated for the time during which the engine is running. To reset the average fuel consumption: press the BC button in the turn signal lever for approx. 2 seconds.
For different routes
You can display the average speed for two different routes on the Control Display, refer to the following and to Trip computer.
Displays on Control Display
You can also call up the computer via iDrive, for explanation of principle.
- Press the MENU button. This opens the start menu.
- Move the controller to the right to open “Navigation”. Without navigation system *: open “Car Data”.
- Select “Car Data” and press the controller

- Select “Onboard info” and press the controller.

- Estimated time of arrival at destination and remaining distance:
- Entering a distance manually in the computer, see below.
- Entering a destination in the navigation system
- Cruising range
- Average speed
- Average fuel consumption.
Periods with the vehicle parked and the engine switched off are not included in the calculations of average speed.
Resetting values
You can reset the values for average speed and average fuel consumption:
- Select the desired menu item and press the controller.
- Press the controller again to confirm.
Entering a distance manually
- Select “Distance to dest.” and press the controller.

- Turn the controller to select the distance to your destination. If necessary, hold it against a slight resistance to enter a greater difference.
- Press the controller to apply the setting.
The distance is automatically predetermined during the destination guidance of the navigation system*.
Trip computer
The trip computer is suitable for a vacation trip, for example.
- Open the start menu.
- Open “Navigation”. Without navigation system*: open “Car Data”.
- Select “Car Data” and press the controller.
- Select “Trip computer” and press the controller.

- Departure time
- Driving time
- Distance traveled
- Average speed
- Average fuel consumption
Switching trip computer on/off and resetting all values:
- Select “Set” and press the controller.
- Select the desired menu item and press the controller.
Display options
You can display the computer or the trip computer in the assistance window.
- Move the controller to the right to change to the assistance window and press the controller.

- Select a menu item:
- “Onboard info”.
- “Trip computer”.
- Press the controller

Service requirements

The remaining driving distance and the date for the next maintenance are displayed briefly with the ignition switched on. The first oil change displayed at approx. 1,200 miles/2,000 km signals that the break-in
check is due.
▶ Your BMW Service Advisor can determine your vehicle’s current service requirements by reading out the data stored in the remote control.
Additional information
You can view more detailed information by using the Control Display, for explanation of principle.
- Open the start menu.
- Press the controller to open the I menu.
- Select “Info sources” and press the controller.
- Select “Service” and press the controller.
- Change to upper field if necessary. Turn the controller until “Service requirements” is selected and press the controller.

- Select “Status” and press the controller.

The display shows a list of selected service and maintenance procedures, as well as legally mandated official inspections. You can request more detailed information on every entry.
Select the entry and press the controller.

To exit from the menu: Select the arrow and press the controller.
Symbols

Entering deadlines for legally required inspections*
Make sure the date on the Control Display is set correctly, otherwise, the effectiveness of CBS Condition Based Service is not ensured.
- Open the start menu.
- Press the controller to open the I menu.
- Select “Info sources” and press the controller.
- Select “Service” and press the controller.
- Change to upper field if necessary. Turn the controller until “Service requirements” is selected and press the controller.
- Select “Status” and press the controller.
- Select “State inspection” and press the controller.

- Select “Set service date” and press the controller. The month is selected.
- Turn the controller to make the adjustment.

- Press the controller to apply the setting. The year is selected.
- Turn the controller to make the adjustment.
- Press the controller to apply the setting. The date entry is stored.
To exit from the menu:
Select the arrow and press the controller.
Check Control
The concept
The Check Control monitors functions in the vehicle and issues a message if there is a malfunction in the monitored systems. A Check Control message of this kind includes indicator or warning lamps in the instrument cluster, possibly an acoustic signal, and text messages at the bottom of the Control Display.
Indicator and warning lamps

The indicator and warning lamps can light up in different combinations and colors.

⚠ This symbol means that a Check Control message has been generated. The symbol remains visible even if the Check Control message has been hidden after a short time. The combinations of warning lamps and text messages are stored and can be viewed later.
Explanatory text messages

Text messages at the bottom edge of the Control Display explain the meaning of the indicator and warning lamps displayed.

You can display supplementary information regarding most Check Control messages, e.g. as to the cause of a malfunction and corresponding actions to be taken, see below. In urgent cases, this information will be shown as soon as the corresponding lamp lights up. To exit the displayed information: Select the arrow and press the controller.
Hiding Check Control messages

Press the CHECK button in the turn signal lever. Some Check Control messages are displayed until the malfunctions have been rectified. They cannot be hidden. If a number of these malfunctions occur simultaneously, they are displayed in succession. Other messages are automatically hidden after approx. 20 seconds, but remain stored.
Displaying stored Check Control messages
- Press the button longer: The first stored message is displayed.

- Press the button: A new message appears each time you press the button.
Displaying supplementary information
- Press the MENU button. This opens the start menu.
- Press the controller to open the I menu.
- Turn the controller until “Info sources” is selected and press the controller.

- Turn the controller until “Service” is selected and press the controller.
- Change to upper field if necessary. Turn the controller until “Check Control messages” is selected and press the controller.

- Select a message and press the controller.

To exit from the menu immediately: Select the arrow and press the controller.
Displaying the urgency of malfunctions

Depending on the equipment, the stored Check Control messages are also displayed with the following symbols:

The symbols also indicate the status of the service requirements display.
Displays after completion of trip
Malfunction reports generated during the trip are shown consecutively when you switch off the ignition. Before the display disappears, you can display the messages once again. Press the CHECK button for approx. 2 seconds. If several messages are present, you can press the CHECK button repeatedly. The display:
- Turns off automatically after a brief period
- Can be turned off at any time by pressing the CHECK button again for approx. 2 seconds
Speed limit
You can enter a speed and a Check Control message indicates when you have reached this speed. This enables you, for example, to receive warnings if you exceed a speed limit in an urban area. You are only warned of reaching this speed a second time if your vehicle speed falls below it again by at least 3 mph/5 km/h.
Displaying, setting or changing limit
- Open the start menu.
- Open “Navigation”. Without navigation system*: open “Car Data”.
- Select “Car Data” and press the controller.
- Select “Limit” and press the controller.

- Select the speed value and press the controller.
- Turn the controller to set the limit. If necessary, hold it against a slight resistance to enter a greater difference.
- Press the controller to apply the setting. The limit is automatically switched on.
Applying your current speed as limit
Select “Select current speed” and press the controller. The system applies your current speed as the limit.
Activating limit
Select “On” and press the controller.
✓ The limit is automatically switched on.
Stopwatch
- Open the start menu.
- Open “Navigation”. Without navigation system *: open “Car Data”.
- Select “Car Data” and press the controller.
- Select “Stopwatch” and press the controller.

Starting, stopping, or resetting
- Select “Start” and press the controller. The stopwatch starts at the displayed time.
- Select “Reset” and press the controller. The stopwatch is reset and it restarts if it was running beforehand.
- Select “Stop” and press the controller. This stops the timer.
Taking an intermediate time reading
Select “Interim time” and press the controller. The interim time appears below the ongoing primary stopwatch count.
▶ All of the remaining functions remain available at all times while the stopwatch is running. The stopwatch continues to operate in the background.
Settings on Control Display
- Press the MENU button once or twice until the start menu appears.

- Press the controller to open the I menu.
- Turn the controller until “Settings” is selected and press the controller.

Setting time
1, Turn the controller until “Time / Date” is selected and press the controller.

2, Move the controller once to the front if necessary to change to the first field from the top.

3. Turn the controller until “Time” is selected and press the controller.

4 Turn the controller until “Set time” is selected and press the controller.

Making settings
- Turn the controller to set the hours and press the controller.
- Turn the controller to set the minutes and press the controller.
The changed time is stored.
Activating hour signal*
You will hear three tones just before each full hour. Select “Hour memo” and press the controller.
✓ The hour signal is activated.
The setting is stored for the remote control currently in use.
Setting time format
- Select “Time format” and press the controller.
- Select the desired format and press the controller.
The setting is stored for the remote control currently in use.
Setting date
- Select “Date” and press the controller.

- Select “Set date” and press the controller. The first section of the date display is selected, in this case the month.
- Turn the controller to make the adjustment.
- Press the controller to apply the setting. The next adjustment is selected.
- Make the remaining adjustments. After the last adjustment, the date is stored.
Changing date format
- Select “Date format” and press the controller.
- Select the desired format and press the controller.
The setting is stored for the remote control currently in use.
Brightness of Control Display
The brightness is automatically adapted to the ambient lighting conditions. However, you can change the base setting.
- Press the MENU button. This opens the start menu.
- Press the controller to open the I menu.
- Select “Settings” and press the controller.
- Select “Display settings” and press the controller.
- Change to upper field if necessary. Turn the controller until “Brightness” is selected and press the controller.

- If necessary, move the controller to the right to select “Display”.
- Turn the controller until the desired setting is selected.
The setting is stored for the remote control currently in use.
Units of measure
You can change the units of measure for fuel consumption, distances, temperature and pressure.
- Press the MENU button. This opens the start menu.
- Press the controller to open the I menu.
- Select “Settings” and press the controller.
- Select “Language / Units” and press the controller.
- Change to upper field if necessary. Turn the controller until “Units” is selected and press the controller.

- Select the menu item to be set.
- Press the controller.
- Select the desired unit of measure and press the controller.
The settings are stored for the remote control currently in use.
Language on Control Display
- Press the MENU button. This opens the start menu.
- Press the controller to open the I menu.
- Select “Settings” and press the controller.
- Select “Language / Units” and press the controller.
- Change to upper field if necessary. Turn the controller until “Languages” is selected and press the controller.

- Select “Text language” and press the controller. You can select a different language for the text displays.
- Select the desired language and press the controller.
The setting is stored for the remote control currently in use.