The 2006-6 Series BMW vehicles come with a key fob or remote control that allows you to open and close the doors, trunk, and sometimes even start the car without a physical key. The specific features of the key fob or remote control will depend on the exact model and year of your BMW 6 Series. You may need to refer to your owner’s manual or contact a BMW dealership for more information on the specific functions of your vehicle’s key fob or remote control.
Keys/remote control
1 Remote control with integrated key
2 Spare key
3 Adapter for spare key, in glove compartment
Remote control with integrated key
Each remote control contains a battery which is automatically charged in the ignition lock while driving. You should use the remote control at least twice a year in order to maintain the charge condition. For equipment with comfort access*, the remote control contains a replaceable battery.
Depending on which remote control is detected by the vehicle during unlocking, different settings are called up and carried out in the vehicle, refer to Personal Profile.
Information on the required maintenance is also stored in the remote control, refer to Service data in remote control.
Integrated key
Press the button 1 to unlock the key. The integrated key fits the following locks:
- Hotel function
- Driver’s door
- Luggage compartment lid
New remote controls
To obtain additional or replace lost keys, new remote controls with an integrated key are available at your BMW center.
Spare key
Store the spare key in a safe place such as your wallet. This key is not intended for regular use. The spare key and integrated key of the remote control fit the same locks.
Adapter for spare key
The adapter is required so that the vehicle can be started with the spare key or radio readiness can be switched on.
Remove the adapter from the holder in the glove compartment and slide the spare key into the adapter.
Personal Profile
The concept
You can set a number of functions of your BMW individually according to your preferences. Personal Profile ensures that most of these settings are stored for the remote control currently in use without you having to do anything. When the vehicle is unlocked, the corresponding remote control is detected and the settings
stored for it are called up and carried out.
This means that you will always find your BMW set to your own personal settings even if another person with his/her own remote control and settings has used the vehicle since the last time you drove it. The individual settings are stored for a maximum of four remote controls.
Personal Profile settings
- When unlocking with the remote control, either unlock only the driver’s door or unlock the entire vehicle
- Locking the vehicle after a short time or after starting to drive
- Assigning the programmable buttons on the steering wheel
- Display settings for the Control Display:
- Brightness of the Control Display
- Units of measure for consumption, route/distances, temperature and pressure
- Language on the Control Display
- 12h/24h clock mode
- Date format
- Displaying optical warning for the PDC Park Distance Control*
- Selection and brightness of the display for the Head-Up Display*
- Air distribution, temperature in the upper body region, and intensity for the automatic climate control
- Adjusting the voice instructions for the destination guidance of the navigation system*
The most recent settings for the following are also called up during unlocking:
- Driver’s seat, exterior-mirror and steeringwheel position
- The volume and tone settings for audio sources
- The display of the stored stations for the radio
- The volume setting for the telephone
Central locking system
The concept
The central locking system is ready for operation whenever the driver’s door is closed. The system either locks or unlocks all of the following:
- Doors
- Compartment in the front center console
- Luggage compartment lid
- Fuel filler door
Operating from outside
- via the remote control
- via the door lock
- with comfort access* via the door handles
These actions operate the anti-theft system at the same time. It prevents the doors from being unlocked using the lock buttons or door handles. The alarm system is likewise armed/disarmed. The interior lamps and the courtesy lamps* are also switched on and off with the remote control.
Operating from inside
Via the central locking button, refer to page 32. The fuel filler door and the compartment in the front center console are not locked. In the event of a serious accident, the central locking system unlocks automatically. The hazard warning flashers and interior lamps are also switched on.
Opening and closing: from outside
Using the remote control
⚠ Because any persons or animals left unattended in a parked vehicle could lock the doors from the inside, you should always keep the remote control with you when you leave the vehicle; this precaution ensures that you will remain able to unlock the vehicle from the outside at all times.
Unlocking
You can use the button to unlock the vehicle depending on the current setting.
- Press the MENU button. This opens the start menu.
- Press the controller to open the I menu.
- Select “Vehicle settings” and press the controller.
- Select “Door locks” and press the controller.
- Select “Central locking” and press the controller.
- Select “Unlock button” and press the controller.
- Select a menu item:
- “All doors” Press the button once to unlock the entire vehicle.
- “Driver’s door only”* Press the button once to unlock only the driver’s door and the fuel filler door. Press the button twice to unlock the entire vehicle.
- Press the controller. The setting is stored for the remote control currently in use.
Convenience opening mode
Press the button longer:
- Coupe: the windows are opened, the glass sunroof* is raised and the sliding visor slides back.
- Convertible: the windows and the convertible top are opened.
⚠ Watch the convertible top during the opening process to be sure that no one is injured. Releasing the button stops the operation.
Locking doors
Press the black button.
Switching on interior lamps
If the vehicle is locked, press the black button. You can also use this function to locate your vehicle in parking garages etc.
Panic mode*
You can also trigger the alarm system in case of danger: Press the black button for at least three seconds. To switch off alarm: press any button.
Opening luggage compartment lid
Press the black button for approx. 1 second. The luggage compartment lid opens, regardless of whether it was previously locked or unlocked.
A previously locked luggage compartment lid is also locked again after closing. Coupe: during opening, the luggage compartment lid pivots back and up. Make sure there is sufficient clearance.
Setting confirmation signals
You can set confirmation signals to acknowledge the locking and unlocking of the vehicle.
- Open the start menu.
- Press the controller to open the I menu.
- Select “Vehicle settings” and press the controller.
- Select “Door locks” and press the controller.
- Select “Confirmation” and press the controller.
- Select the desired signal.
- Press the controller.
√ The signals are switched on.
Malfunctions
the remote control. Should the remote control fail to operate owing to interference of this kind, unlock and lock the vehicle via the door lock using the key. If it is no longer possible to lock the vehicle using the remote control, then the battery is discharged. Use this remote control during an extended drive; this will recharge the battery.
For US owners only
The transmitter and receiver units comply with part 15 of the FCC/Federal Communication Commission regulations. Operation is governed by the following:
FCC ID:
LX8766S
LX8766E
LX8CAS
LX8CAS2
Compliance statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
▶ Any unauthorized modifications or changes to these devices could void the user’s authority to operate this equipment.
Using door lock
When unlocking
- Turning the key once unlocks the driver’s door and the fuel filler door.
- A second turn of the key unlocks the passenger door and luggage compartment lid.
Convenience operation
You can also use the door lock to operate the windows and the glass sunroof* in the Coupe or to operate the windows and the top in the Convertible.
- To open: With the door closed, turn the key to the Unlock position and hold it there.
- To close: With the door closed, turn the key to the Lock position and hold it there.
⚠ Keep a close eye on the closing process and also on the opening process of the convertible top to be sure that no one is injured. Releasing the key stops the operation.
Manual operation
In the event of an electrical malfunction, you can turn the key all the way to the right or left in the door lock to lock or unlock the driver’s door.
Opening and closing: from inside
This button serves to unlock or lock doors and the luggage compartment lid, but does not activate the anti-theft system. The fuel filler door remains unlocked. You can also make the following settings:
- The central locking system automatically locks the vehicle after a short time when no door has been opened.
- The central locking system automatically locks the vehicle as soon as you start to drive
iDrive, for principle details.
- Press the MENU button. This opens the start menu.
- Press the controller to open the I menu.
- Select “Vehicle settings” and press the controller.
- Select “Door locks” and press the controller.
- Select “Central locking” and press the controller.
- Select “Relock door if not opened” or “Lock after driving”.
- Press the controller.
√ The setting is selected. The setting is stored for the remote control currently in use.
Unlocking and opening doors
- Either unlock both doors at the same time with the button for the central locking system and then pull the door handle above the armrest or
- pull the door handle for each door twice: the first pull unlocks the door, and the second one opens it.
Locking doors
- Use the central locking button to lock both of the doors simultaneously, or
- press down the lock button of the desired door. To prevent you from being locked out, the open driver’s door cannot be locked using the lock button.
⚠ Because any persons or animals left unattended in a parked vehicle could lock the doors from the inside, you should always keep the remote control with you when you leave the vehicle; this precaution ensures that you will remain able to unlock the vehicle from the outside at all times.
Hotel function
The hotel function locks the compartment in the front center console and the luggage compartment lid separately and disconnects them from the central locking system. If you hand over the remote control without the integrated key e.g. at a hotel, then this prevents access to the luggage compartment and to the compartment in the front center console.
Turn the key to the right, refer to illustration, until the key slot points in the direction of travel and then remove: The hotel function is only activated after subsequent locking or unlocking of the vehicle. The system locks the luggage compartment lid and the compartment in the front center console and disconnects them from the central locking system.
Manual release
In order to manually unlock the compartment in the front center console in the event of an electrical malfunction, turn the key all the way to the right until it reaches the stop.
▶ If unlocking was manual, the lock must be returned to the home position, i.e. all the way back to the left, before reactivation of the hotel function.
Luggage compartment lid
During opening, the luggage compartment lid pivots back and up. Make sure there is sufficient clearance.
Opening from inside
Press the button: The luggage compartment lid opens, provided that it is not locked or the hotel function is not activated, refer to the above section.
Opening from outside
Press the upper half of the BMW emblem or press the button on the remote control for approx. 1 second: the luggage compartment lid opens.
▶ Convertible: if the convertible top is not completely open or closed, then the luggage compartment lid cannot be opened.
Manual release
The luggage compartment lid lock is located under the BMW emblem. All keys, fit the luggage-compartment lid lock. Turn the key toward the right up to the stop: the luggage compartment lid opens.
▶ If you use the lock to open the luggage compartment lid while the alarm system is armed, the alarm will be triggered. To prevent this, you should deactivate the alarm beforehand.
If the alarm has been triggered accidentally, switch off the alarm.
Emergency release
Pull lever in luggage compartment. The luggage compartment lid is unlocked.
Closing
⚠ Make sure that the closing path of the luggage compartment lid is clear; otherwise, injuries may result.
Only drive with the luggage compartment lid completely closed, otherwise exhaust can penetrate into the passenger compartment.
The handle recesses on the interior trim of the luggage compartment lid make it easier to pull down.
If special circumstances should make it absolutely necessary to operate the vehicle with the luggage compartment lid open:
- Coupe: close both windows and the glass sunroof*. Convertible: with the convertible top closed, close all windows, including the rear window.
- Increase the air volume of the automatic climate control to a high level.
Luggage compartment
There are four lashing eyes on the inner corners of the luggage compartment for securing luggage nets* or securing straps to fix luggage in position. Also refer to Securing cargo.
Convertible: increasing luggage compartment capacity
With the convertible top closed, you can enlarge the luggage compartment capacity. To do so, unfold the handle and press it downward in the direction of travel, refer to arrow. This moves the convertible top compartment floor into the raised position. Before opening the convertible top, execute this procedure in reverse order.
▶ The convertible top cannot be opened if the convertible top compartment floor is in the raised position.
Alarm system
The concept
The vehicle alarm system responds:
- To the opening of a door, the hood, or the luggage compartment lid
- To movements in the vehicle interior: interior motion sensor, see below
- To changes in the vehicle’s tilt if someone attempts to steal the wheels or tow the vehicle
- To interruptions in battery voltage
Unauthorized operations are briefly signaled by the alarm system:
- by triggering an acoustic alarm
- by switching on the hazard warning flashers
- by flashing the high beams
Arming and disarming alarm system
When you lock or unlock the vehicle, either with the remote control or at the door lock, the alarm system is armed or disarmed at the same time.
You can open the luggage compartment lid, even with the system armed, by using the button of the remote control. When the luggage compartment lid is closed, it is once again locked and monitored.
Switching off alarm
- Unlock the vehicle using the remote control
- insert the remote control as far as possible into the ignition lock
Indicator lamp displays
- The indicator lamp below the interior rearview mirror flashes continuously: the system is armed.
- The indicator lamp flashes after locking: the doors or luggage compartment lid are not properly closed. Even if you do not close the alerted area, the system begins to monitor the remaining areas, and the indicator lamp flashes continuously after approx. 10 seconds. However, the interior motion sensor is not activated.
- After the vehicle is unlocked, the indicator lamp goes out: no manipulation or attempted intrusions have been detected in the period since the system was armed.
- The indicator lamp flashes after unlocking until the remote control is inserted into the ignition lock, however for a maximum of approx. 5 minutes: an attempted entry has been detected in the period since the system was armed.
Tilt alarm sensor
Monitors the inclination of the vehicle. The alarm system reacts, for example, if someone attempts to steal the wheels or tow the vehicle.
Interior motion sensor
Coupe: In order for the interior motion sensor to function properly, the windows and glass sunroof* must be completely closed. Convertible: Monitors the interior up to the height of the seat cushions. This means that the alarm system, including the interior motion sensor, is armed even if the convertible top is open. Falling objects, e.g. leaves, can trigger false alarms, refer to Avoiding unintentional alarms.
Avoiding unintentional alarms
The tilt alarm sensor and interior motion sensor may be switched off at the same time. This prevents unintentional alarms, e.g. in the following situations:
- In stacking garages
- When transporting on car-carrying trains
- When animals are to remain in the vehicle
Switching off the tilt alarm sensor and interior motion sensor
Press the button on the remote control once again immediately after locking. The indicator lamp lights up briefly and then flashes continuously. The tilt alarm sensor and the interior motion sensor are switched off until the vehicle is unlocked and locked again.
Comfort access*
Comfort access enables you to access your vehicle without having to hold the remote control in your hand. It is sufficient to carry the remote control with you, e.g. in your jacket pocket. The vehicle automatically detects the related remote control in the immediate vicinity or in the interior. Comfort access supports the following functions:
- Unlocking/locking vehicle
- Starting engine
- Comfort locking
Functional requirement
- The vehicle can only be unlocked if the vehicle detects that the remote control carried is located outside the vehicle.
- The next unlocking and locking cycle is not possible until after approx. 2 seconds.
- The engine can only be started if the vehicle detects that the remote control carried is located in the vehicle.
Special features in contrast to ordinary remote control
It is basically irrelevant whether you operate the above-mentioned functions with the comfort access feature or by pressing the buttons on the remote control. Before doing so, please familiarize yourself with the information on opening and closing. The special features when using comfort access are described below.
Unlocking
Completely grasp a door handle, arrow 1. This corresponds to pressing the button. If a remote control is detected in the interior after unlocking, the electric steering-wheel lock disengages.
Locking doors
Touch the surface, arrow 2 on the driver’s door or 3 on the passenger door with a finger for approx. 1 second. This corresponds to pressing the button. For comfort closing, hold a finger on the surface, arrow 2 or 3.
▶ If a remote control accidentally left in the luggage compartment is detected inside the locked vehicle after the luggage compartment lid has been closed, then the luggage compartment lid opens again. The hazard warning flashers flash and an acoustic signal* sounds.
Switching on radio readiness
By briefly pressing the Start/Stop button, you switch on the radio readiness.
▶ When doing so, do not depress the brake pedal; otherwise, the engine will start immediately.
Starting engine
You can start the engine or switch on the ignition if a remote control is located on the interior of the vehicle. It need not be inserted in the ignition lock.
If you take the remote control with you when leaving the vehicle with the engine running, a warning lamp lights up. In addition, a message appears on the Control Display. As long as no remote control is detected in the vehicle, it is only possible to restart the engine within approx. 10 seconds after it is switched off.
Switching off engine with automatic transmission
The engine can only be switched off in the selector lever position P. To switch off the engine in the selector lever position N, the remote control must be inserted in the ignition lock.
Before driving into a car wash with automatic transmission
- Insert the remote control into the ignition lock.
- Depress brake pedal.
- Place selector lever in position N.
- Switch off the engine.
The vehicle can roll.
Malfunction
The comfort access function may malfunction due to local radio waves. If this occurs, then open or close the vehicle with the buttons on the remote control or with a key. To start the engine after this, insert the remote control in the ignition lock.
Replacing battery
The remote control for comfort access contains a battery which must be replaced occasionally.
- Remove integrated key from remote control.
- Remove cover.
- Insert new battery with positive side facing upward.
- Press cover closed.
Return used battery to a recycling collection point or to your BMW center.
Windows
⚠ To prevent injuries, exercise care when closing the windows and keep them in your field of vision until they are shut. Always take along the remote control when you leave the vehicle; otherwise, children could, for example, operate the windows and injure themselves.
Coupe: opening, closing
- Press switch to resistance point: The window continues to open for as long as you hold down the switch.
- Press the switch beyond the resistance point: The window opens automatically. Pressing the switch again stops the opening movement.
You can close the windows in the same manner by pulling the switch.
Convertible: opening, closing
⚠ To close the side windows while the vehicle is being driven, always close the rear windows first or all four windows simultaneously; otherwise, the windows cannot close tightly at higher speeds.
Individually
- Press the switch down to the resistance point: The window continues to open for as long as you hold down the switch.
- Press the switch beyond the resistance point: The window opens automatically. Pressing the switch again stops the opening movement.
You can close the windows in the same manner by pulling the switch. The rear windows cannot be closed automatically.
Together
- Briefly press button 1: The LEDs in the button 1 and the switch 2 light up for approx. 10 seconds.
- Press switch 2:
- Down to the resistance point: All windows, including the rear window, continue to open as long as you press the switch. You can close the windows in the same manner by pulling the switch.
- Press the switch beyond the resistance point: All windows open automatically. Pressing the switch again stops the opening movement.
Briefly press button 1 again to deactivate the function. The LEDs go out.
Rear window
- Briefly press button 1: The LEDs in the button 1 and the switch 2 light up for approx. 10 seconds.
- Press switch 2:
- Down to the resistance point: The rear window continues to open for as long as you hold down the switch. You can close the rear window in the same manner by pulling the switch.
- Press the switch beyond the resistance point: The rear window opens automatically. Pressing the switch again stops the opening movement.
Briefly press button 1 again to deactivate the function. The LEDs go out.
▶ The rear window opens and closes automatically when you open or close the convertible top.
After switching off ignition
You can still operate the windows with the remote control removed or the ignition switched off for approx. 1 minute, but in the Convertible, this is only true as long as no door has been opened.
For information on using the convenience operation mode at the door lock or with the remote control.
Anti-trapping mechanism
If the closing force rises beyond a predefined threshold during closing, the system will immediately stop moving the window prior to lowering it slightly.
▶ Convertible: the rear side windows and rear window are not equipped with an anti-trapping mechanism.
⚠ Despite the anti-trapping mechanism, you should inspect the travel path of the front side window prior to closing it, as the safety feature could fail to detect certain kinds of obstructions, such as very thin objects, and the window would continue closing.
Pulling the switch beyond the resistance point and holding it limits the response of the antitrapping mechanism. In this case, the window will respond to forces beyond a defined threshold by opening only slightly. If you pull the switch past the resistance point again within approx. 4 seconds and hold it there the anti-trapping mechanism will be deactivated.
Accessories in window area
After installing any accessory within the travel range of the window – such as a clamp-on antenna for a mobile phone, you will need to have the system reinitialized for use under the new conditions. Please contact your BMW center for assistance.
Coupe: Glass sunroof, electric with raise function*
The glass sunroof and sliding visor are operational whenever the ignition is switched on.
⚠ To prevent injuries, exercise care when closing the glass sunroof and keep it in your field of vision until it is shut. Always take along the remote control when you leave the vehicle; otherwise, children could, for example, operate the roof and injure themselves.
Raising and closing glass sunroof
- Briefly press the switch: The sunroof opens and the sliding visor moves back approx. 2 in/5 cm or press the switch twice past the resistance point toward the rear: The sunroof opens and the sliding visor moves completely back.
- To close, briefly press the switch or push it twice beyond the resistance point toward the front: The sunroof and sliding visor close.
Opening and closing sliding visor
- Push the switch up to the resistance point in the desired direction: The sliding visor continues to move for as long as you hold the switch.
- Push the switch beyond the resistance point in the desired direction: The sliding visor moves automatically. Briefly press the switch again in any direction to stop the movement.
Anti-trapping mechanism
If the glass sunroof encounters resistance when closing, the closing action is interrupted and the
glass sunroof opens. If the sliding visor encounters resistance when closing within the last approx. 8 in/20 cm, the closing action is interrupted and the sliding visor opens again slightly.
⚠ Despite the anti-trapping mechanism, you should inspect the sunroof’s travel range prior to closing it, as the safety feature might fail to detect certain kinds of obstructions, such as very thin objects, and the sunroof would continue closing. Pressing the switch beyond the resistance point and holding it deactivates the antitrapping mechanism.
Following interruptions in electrical power supply
After an interruption in the power supply the glass sunroof may not move. The system has to be initialized. Should this occur, please have the sunroof initialized at your BMW center.
Moving manually
In the event of an electrical malfunction, you can move the panorama glass sunroof and the sliding visor manually.
Glass sunroof
- Remove cover on headliner in front of rear window. To do so, lift slightly, arrows 1. Grasp behind the cover, arrows 2 and pull firmly downward.
- Insert Allen wrench from onboard tool kit, into the opening provided.
- Use the Allen wrench to move the glass sunroof in the desired direction.
Sliding visor
1. Fold the cover downward, if necessary using the screwdriver from the onboard tool kit
2. Insert the Allen wrench supplied with the onboard tool kit into the opening provided.
3. Use the Allen wrench to move the sliding visor in the desired direction.
Convertible: top
The fully automatic convertible top combines secure weather protection with simple and convenient operation. Here are a few tips for getting the maximum pleasure from your Convertible:
- It is advisable to close the convertible top when the vehicle is parked. The closed convertible top not only protects the passenger compartment from unforeseen weather damage, it also provides a certain amount of protection from theft. Nonetheless, even if the convertible top is closed, only keep valuables in the locked luggage compartment.
- Do not attach luggage rack systems to the convertible top.
⚠ In order to avoid damage, do not operate the convertible top at temperatures below +147/–106. Do not leave the convertible top in its storage compartment for longer than one day when wet; otherwise, damage from moisture can occur. Do not place any objects on the convertible top; otherwise, if the top were to be operated, these objects could fall off and lead to damage or injury.
Never move the convertible top when the rollover protection system is raised. Driving without having completed the opening or closing action can lead to damage or injury. Do not place hands in the top mechanism during the opening and closing action. Keep children away from the travel path of the convertible top. For safety reasons, do not operate the convertible top unless the vehicle is stationary.
▶ If you have initiated top operation with the vehicle at a stop and then start to drive, e.g. at a traffic light, you can continue the initiated operation up to a speed of 20 mph/30 km/h: To do so, press and hold the corresponding button.
▶ Partial vacuums that occur at higher speeds in the passenger compartment can make the convertible top flap. Use the automatic climate control to increase the air supply so that a partial vacuum in the vehicle does not occur.
Prior to opening and closing
- Read the safety precautions above carefully and comply with them fully.
- Make sure that the convertible top compartment floor in the luggage compartment is in the lowered position. otherwise, the convertible top cannot be opened.
- Make sure that the luggage compartment lid is closed.
Opening and closing
Ignition key in radio ready position or higher, with the vehicle stationary:
▶ To avoid putting excessive strain on the battery, operate the convertible top only when the engine is running, if possible. Before closing the convertible top, remove foreign objects from the windshield frame, as these might inhibit closing of the convertible top.
1 Closing
2 LED
3 Opening
▶ When the button for operating the convertible top is pressed, the side windows move downward slightly and the rear window is lowered completely. If you hold down the button after the LED 2 goes out, then the windows travel upward again. If the convertible top is not completely open or closed, then the luggage compartment lid cannot be opened.
LED
In the following situations, in addition to the LED, a message is displayed on the Control Display and an acoustic signal may sound:
- During convertible top operation, the LED lights up green. It goes out as soon as the opening or closing action is finished.
- If the LED flashes red when you release the button, the opening or closing action has not yet finished.
- If the LED lights up red when the button is pressed, either the floor of the convertible top storage compartment in the luggage compartment is in the raised position or a malfunction has occurred. The convertible top cannot be moved.
Interruption
The automatic sequence of movements is interrupted immediately if the button for top operation is released. The sequence can be continued in the desired direction by pressing the appropriate button. If the opening or closing action is interrupted for a longer period, the convertible top remains in that position for approx. 15 minutes before it slowly moves to a stable position.
⚠ A convertible top which is not completely opened or closed presents a danger. Do not interrupt and continue the closing action several times in succession; otherwise, the top mechanism can be damaged.
▶ If the convertible top is not completely open or closed, then the luggage compartment lid cannot be opened.
Manual closing
⚠ Only close the convertible top manually if absolutely necessary; never open it manually. The convertible top compartment lid cannot be locked in the event of an electrical malfunction and would open while the vehicle is being driven. Improper handling can lead to damage.
Before closing
- Open luggage compartment lid.
- Take the Allen wrench and the screwdriver from the onboard tool kit.
- Pry out the two buttons in the luggage compartment with the screwdriver and then pull firmly. This unlocks the convertible top compartment lid.
- Close luggage compartment lid.
▶ During manual convertible top operation, the luggage compartment lid cannot be opened.
- Completely open the side windows and the rear window. If the rear window cannot be opened using the switch, it must be lowered manually.
Opening rear window manually
- Pry out the cover between the rear head restraints. To do so, place the screwdriver as close as possible to the locking elements, as shown in the illustration.
- Insert the Allen wrench as far as possible into the opening and turn firmly in the direction indicated by the arrow until the rear window is completely open.
Closing
⚠ Perform the following work steps with the assistance of a second person and with the doors open to prevent injury and damage to the convertible top.
- Push the cover 1 on the left and right of the side panel forward. Reach into the resulting openings and raise the convertible top compartment lid 2 as far as it will go.
- Grasp the top with both hands at the left and right side frame, arrow 3.
⚠ Lifting the convertible top by parts other than the side frame can damage it.
- In concert with the other person, pull the two sides of the convertible top out simultaneously and pivot forward. In doing so, keep the convertible top compartment lid open, arrow 4, e.g. with your shoulder.
- Raise the two convertible top ends as far as they will go, arrow 5, and close the convertible top-compartment lid, arrow 6.
⚠ Do not raise the convertible top ends until after the convertible top has been swung forward; otherwise, damage can occur.
- Fold the top ends down onto the convertible-top compartment lid.
- From the interior, take out the cover in the center of the front top frame; use a screwdriver if necessary.
- Insert the Allen wrench into the opening provided.
- From the outside, both persons pull the front frame of the convertible top downward, as simultaneously as possible on the two sides.
- Turn the Allen wrench in the direction of the arrow until the front convertible top frame is
locked to the windshield frame. The rear convertible top ends are pressed automatically onto the convertible top compartment lid and close tightly with tension. - If necessary, close the rear window again manually in the same way as above.
Wind deflector*
The wind deflector keeps the air movement in the passenger compartment to a minimum when the convertible top is open, thus enabling pleasant driving even at higher speeds. The wind deflector is stowed in a protective sleeve in the luggage compartment. Short instructions for use are also provided on the protective sleeve.
Before installing
- Remove the wind deflector from the protective sleeve and fold it open, refer to arrows 1.
- Press the upper and lower section together until the locking device engages, refer to arrow 2.
- Push the securing pin 3 out until it engages.
- Unfold the rear mounts 4.
Installing
- Insert the securing pin 1 of the wind deflector into the appropriate opening on the right side of the vehicle.
- Guide the rear mounts 2 into the receptacles provided.
- Push the securing pin 3 on the left side into the appropriate opening until it snaps into place.
- Fold up the upper half 4 of the wind deflector.
⚠ With wind deflector fitted: do not incline the front seat backrests too far backward if the seat is to be moved back to the end position; otherwise, the wind deflector will be damaged.
Removing
The same as installing, but in reverse order.
Folding up
- Push the handle of the securing pin on the wind deflector on the left side of the vehicle all the way back and release the locking mechanism.
- Fold in the upper and lower section.